T3 Driver

PART ID: 21300 (includes hoses and mount bracket)

The T3 Post Driver is a small driver that delivers big time results! The T3 Driver will drive T-posts up to a 3" O.D. (outside diameter) pipe at a rate of up to six strikes per second. The top of the post is fully contained to prevent kick out and protected from damage by the strike plate. Use your tractor, skid-steer, mini-ex, loader, or backhoe to carry the weight of the driver. We offer several mounting options, including an offset skid-steer quick attach which allows the operator to drive parallel to the fence line, a bolt-on/weld-on bracket that mounts to almost any flat surface, and a tilt bracket for up to 20° adjustments left or right. Use down pressure from the host vehicle to drive more posts in the ground faster. The T3 Driver includes one bolt-on/weld-on bracket, hoses and flat face ISO couplers for simple plug and play operation. This is an ideal post driver for most farmers, ranchers, fencing contractors, and rental yards.


 Watch Videos
Mounting Options
  P65 Warning WARNING
This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.
Post Dimensions: T-post to 3" O.D. pipe
Impact Force: 2,000 lbs. per stroke
Impact Energy: 40 ft.-lbs. per stroke
Hammer Weight: 10 lbs.
Strokes Per Second: 6
T3 Driver Skid‑Steer Skid‑Steer Offset Euro/Global John Deere 200-500 Series
Overall Depth 12" 14" 18" 16" 15"
Overall Width 11" 45.5" Extendable 50.5"-86.5" 45" 49"
Overall Height 17" 19" 21" 24"
Weight 86 lbs. 173 lbs. 286 lbs. 181 lbs. 193 lbs.
Hydraulic Requirements 1500-3000 PSI & Up to 30 GPM*
* T3 Driver will operate at 6 strikes per second on vehicles with
15-30 GPM. It will function at fewer strikes per second below 15 GPM.
21305 T3 Driver Skid-Steer Quick Attach Mount
21355 T3 Driver Skid-Steer Offset Quick Attach Mount
21303 T3 Driver Euro/Global Offset Quick Attach Mount
21304 T3 Driver John Deere 200/300/400/500 Series Quick Attach Mount
21302 Mount Bracket
3501 Backhoe & Excavator Mount Specification Form
21301 Tilt Bracket Assembly
21302 Mount Bracket
21356 Plumb Bob
196056 Front-End Loader Hose Kit