Intimidator Tree & Post Puller

Take Control of your Land!

A true land-clearing, obstacle-removing attachment for your skid-steer or tractor.
PULL
trees, stumps, shrubs, posts
SAW/DIG
large tree roots/stumps, boulders, rocks
CARRY
trees, shrubs, posts, rocks

A true land-clearing, obstacle-removing attachment for your skid-steer or tractor

The Intimidator is ideal for eliminating trees, saplings, shrubs, bushes, and other obstructions on the job site or farm. The unmatched versatility of the Intimidator handles the toughest stumps, posts, rocks, fencerows, and land-clearing jobs. Selectively eliminate what you want. Maneuver into tight locations and next to buildings or fences with ease. Remove the complete tree or stump, roots and all. Remove larger trees, even with smaller skid-steers or tractors, using the replaceable excavator bucket teeth and vertical jaw saw teeth to dig and cut roots.

Uniquely synchronized jaws, designed for less wear and tear on the vehicle, are actuated by a rear-mounted, fully-protected 3" diameter cylinder, allowing the operator to aggressively excavate objects without fear of damage to the cylinder. Tapered jaws allow for larger trees to be gripped near the back of the jaws, maximizing pulling force. The bidirectional side saw teeth on the 12200T model provide a more aggressive design that allows you to cut off trees flush to the ground. Maximum horsepower rating = 125 HP.

Lower operating costs than a bulldozer and less work than a chainsaw. Intimidate your job with the Danuser Intimidator.

FEATURESIntimidator Tree and Post Puller

Uniquely Synchronized Jaws

Designed for less wear and tear on the vehicle, are actuated by a rear-mounted, fully-protected 3" diameter cylinder, allowing the operator to aggressively excavate objects without fear of damage to the cylinder.

Tapered Jaws

Allow for larger trees to be gripped near the back of the jaws, maximizing pulling force.

Bidirectional Side Saw Teeth - 12200T

Provide a more aggressive design that allows you to cut off trees flush to the ground.

intimidator tree and post puller danuser

Options and Specifications

Mounts (Tree & Post Puller)
Intimidator Case Options
Teeth Jaws
Part ID: 12200 - Intimidator Skid-Steer Quick Attach Mount
  • Max. Jaw Opening (inches)

    34"

  • Jaw Material (inches)

    3/4" Thick Hardened T1 Gr. Steel

  • Max. Cylinder Force

    21,000 lbs.

  • Cylinder Diameter (inches)

    3"

  • Greasable Jaw Pivot Pins (inches)

    2" dia.

  • Overall Width (inches)

    46"

  • Overall Length (inches)

    54.2"

  • Overall Height (inches)

    47.25"

  • Machine Weight

    685 lbs.

  • Max. Continuous Operating Pressure

    3,500 PSI

  • Minimum GPM

    None

Part ID: 12200T - Intimidator Skid-Steer Quick Attach with Side Saw Teeth Jaws
  • Max. Jaw Opening (inches)

    34"

  • Jaw Material (inches)

    3/4" Thick Hardened T1 Grade Steel

  • Max. Cylinder Force

    21,000 lbs.

  • Cylinder Diameter (inches)

    3"

  • Greasable Jaw Pivot Pins (inches)

    2" dia.

  • Overall Width (inches)

    46"

  • Overall Length (inches)

    54.2"

  • Overall Height (inches)

    47.25"

  • Machine Weight

    710 lbs.

  • Max. Continuous Operating Pressure

    3,500 PSI

  • Minimum GPM

    No Minimum GPM

Part ID: 12200CSE - Intimidator Skid-Steer Quick Attach For Case IH 1835B, 1835C, and 1840
  • Max. Jaw Opening (inches)

    34"

  • Jaw Material (inches)

    3/4" Thick Hardened T1 Grade Steel

  • Max. Cylinder Force

    21,000 lbs.

  • Cylinder Diameter (inches)

    3"

  • Greasable Jaw Pivot Pins (inches)

    2" dia.

  • Overall Width (inches)

    46"

  • Overall Length (inches)

    54.2"

  • Overall Height (inches)

    47.25"

  • Machine Weight

    685 lbs.

  • Max. Continuous Operating Pressure

    3,500 PSI

  • Minimum GPM

    No Minimum GPM

Part ID: 12200CSET - Intimidator Skid-Steer Quick Attach with Side Saw Teeth Jaws for Case IH Models 1835B, 1835C, and 1840
  • Max. Jaw Opening (inches)

    34"

  • Jaw Material (inches)

    3/4" Thick Hardened T1 Grade Steel

  • Max. Cylinder Force

    21,000 lbs.

  • Cylinder Diameter (inches)

    3"

  • Greasable Jaw Pivot Pins (inches)

    2.04" dia.

  • Overall Width (inches)

    46"

  • Overall Length (inches)

    54.2"

  • Overall Height (inches)

    47.25"

  • Machine Weight

    710 lbs.

  • Max. Continuous Operating Pressure

    3,500 PSI

  • Minimum GPM

    No Minimum GPM

Part ID: 12200F - Intimidator Flat Back (for custom fabrication to fit other mount styles)
  • Max. Jaw Opening (inches)

    34"

  • Jaw Material (inches)

    3/4" Thick Hardened T1 Grade Steel

  • Max. Cylinder Force

    21,000 lbs.

  • Cylinder Diameter (inches)

    3"

  • Greasable Jaw Pivot Pins (inches)

    2" dia.

  • Overall Width (inches)

    46.7"

  • Overall Length (inches)

    54.2"

  • Overall Height (inches)

    47.25"

  • Machine Weight

    776 lbs.

  • Max. Continuous Operating Pressure

    3,500 PSI

  • Minimum GPM

    No Minimum GPM

Part ID: 12200FT - Intimidator Flat Back with Side Saw Teeth Jaws (for custom fabrication to fit other mount styles)
  • Max. Jaw Opening (inches)

    34"

  • Jaw Material (inches)

    3/4" Thick Hardened T1 Grade Steel

  • Max. Cylinder Force

    21,000 lbs.

  • Cylinder Diameter (inches)

    3"

  • Greasable Jaw Pivot Pins (inches)

    2" dia.

  • Overall Width (inches)

    46.7"

  • Overall Length (inches)

    54.2"

  • Overall Height (inches)

    47.25"

  • Machine Weight

    805 lbs.

  • Max. Continuous Operating Pressure

    3,500 PSI

  • Minimum GPM

    No Minimum GPM

Part ID: 12201 - Intimidator Euro/Global Quick Attach
  • Max. Jaw Opening (inches)

    34"

  • Jaw Material (inches)

    3/4" Thick Hardened T1 Grade Steel

  • Max. Cylinder Force

    21,000 lbs.

  • Cylinder Diameter (inches)

    3"

  • Greasable Jaw Pivot Pins (inches)

    2" dia.

  • Overall Width (inches)

    46"

  • Overall Length (inches)

    56.7"

  • Overall Height (inches)

    47.25"

  • Machine Weight

    745 lbs.

  • Max. Continuous Operating Pressure

    3,500 PSI

  • Minimum GPM

    No Minimum GPM

Part ID: 12201T - Intimidator Euro/Global Quick Attach with Side Saw Teeth Jaws
  • Max. Jaw Opening (inches)

    34"

  • Jaw Material (inches)

    3/4" Thick Hardened T1 Grade Steel

  • Max. Cylinder Force

    21,000 lbs.

  • Cylinder Diameter (inches)

    3"

  • Greasable Jaw Pivot Pins (inches)

    2" dia.

  • Overall Width (inches)

    46"

  • Overall Length (inches)

    56.7"

  • Overall Height (inches)

    47.25"

  • Machine Weight

    770 lbs.

  • Max. Continuous Operating Pressure

    3,500 PSI

  • Minimum GPM

    No Minimum GPM

"Mesquite removal and cleanup! The Danuser Intimidator outdid itself once again on this project, and is certainly one of the best tools in the business to have on the trailer!" NTX Land Services

Literature and Media

Name
Intimidator
Company Vertical

Warning

This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.