Python
Wire Winder
The Python Wire Winder takes the bite out of rolling up fence wire.
With features like tie wire grooves, ten wire starter slots, and retention pin storage, the Python is sure to put the squeeze on your next wire wrapping project. To wind up a single strand or multiple strands, simply attach the Python to a hydraulic auger drive with 2” hex, place the two tie wires in the grooves, then place the fence wire strand(s) in the slot(s), and turn on the auger drive to start wrapping. Tilting the drive unit toward and away from the direction of the wire will allow for even spooling. Once the wire is wrapped up, wrap the tie wires, pull the pin, separate the two halves, pull the roll of wire off, and reassemble the Python to start on the next section.
FEATURESWire Winder
Capacity
Can roll up to ¾ mile of barbed wire (12.5 gauge) or six miles of smooth wire (14 gauge), roll multiple wires at one time
Connection
2” Hex connection mounts to existing hydraulic auger drive
Convenient
Convenient retention pin storage locations
Wire Tie
2 Wire Tie locations
Wire Slots
10 wire slot locations to start wire
Tooless Operation
No tools needed to operate
Retention Pin
Convenient retention pin storage locations

Options and Specifications
-
Capacity
Up to 3/4 mile barbed (12.5 gauge)
Up to 6 miles smooth (14 gauge) -
Overall Width (inches)
22"
-
Overall Height (inches)
34.1"
-
Weight
90 lbs.
-
Mount (inches)
2" hex
Literature and Media
Other Products
Warning
This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.