Danuser7 Reasons To Remove Stumps With the Danuser Stump Auger
Removing trees can be hard work - especially when the tree is too large to remove with a tree puller, and you're left with needing to cut it down. What do you do with the stump? Most of us don't own a bulldozer to push the stump out, and leaving it where it is defeats the purpose of removing the tree in the first place. So, what do you do?
You remove the stump with the Danuser Stump Auger! While other brands may tout their ability to remove stumps, the Danuser Stump Auger is unique to the industry in multiple ways.
Here are 7 reasons to use the Danuser Stump Auger to completely remove your stumps:
- Work Safer:
The Stump Auger is safer to work in proximity to compared to other brands. Our technology planes the wood away - shaving it down instead of blowing chips and debris all over the place. This means you can get closer without the risk of being injured. - Work Quieter:
Work in residential areas without the neighbors complaining about the noise! The Stump Auger runs much quieter than grinders, making the working day more enjoyable. - Work With the Right Size:
Bigger is always better right? Wrong! One of the main objectives in stump removal is to cut the stump to be at or below ground level. Large rotary grinders cut huge swaths into the surrounding soil when grinding so low. Digging the stump out in this way can leave a very large hole, which can be unsightly and a tripping hazard for you, your clients, or your livestock. But, the size of the Danuser Stump Auger allows you to shave the stump below ground level without disturbing the surrounding soil. With it, you can cut out any size stump by overlapping your cutting area on the surface of the stump and leave minimal ground interference behind.
- Work With Any Auger Drive Motor:
Don't own a Danuser EP Auger Drive? Of course we suggest that you get one, but the Stump Auger can also work on other auger drives. While it comes standard with a 2" hex drive, we offer adapters to fit 2" and 2-9/16" round drives as well. - Work With a Product That LASTS:
We designed our Stump Auger to provide you DECADES of service! The cutting edges on the Stump Auger are reversible and can be sharpened for an extended life. Many stumps later, if they're not cutting quite as well, simply replace them. You won't find another stump remover that lasts as long. - Work Smarter:
Work smarter, even with smaller vehicles. Our threaded pilot assembly digs into the stump first and pulls the cutting edges into the wood behind it. This makes our Stump Auger ideal for smaller machines that are unable to generate a ton of down pressure. - Work With Vehicle Flexibility:
Work with just about any vehicle! With a minimum torque requirement of 1,700 ft.-lb., the Danuser Stump Auger is capable of running on a variety of vehicles, including tractors, skid-steers, backhoes, excavators, mini-excavators, mini-skid-steers, and more.
Watch the video to see the Danuser Stump Auger in action.
If you're a landscaper looking for the best, most efficient machine for your stump removal jobs, a livestock owner needing a good machine to use around your herds, or simply a land owner needing to clear some trees and stumps, the Danuser Stump Auger is for you. Select How to Buy to request a quote, locate a distributor, or connect with a Danuser representative