Comp Coil Unit with Recoil Pad Adjuster Kit

PART ID: 50059-1

The Comp Coil Assembly is a compression spring recoil reducing unit. The Comp Coil reduces the recoil felt of a firearm, just as a coil spring on a vehicle axel. The base and back plates are primarily the same as on the Counter Coil. Aluminum and steel construction with some components that are yellow dichromate zinc plated. The compression travel is approximately 5/16". For large bore guns, no compression cylinder support is needed. In most cases, the Comp Coil can be mounted on semi-auto firearms. The Counter Coil installation fixture and drills will work for the Comp Coil also. The Recoil Pad Adjuster Kit provides butt plate positional adjustments.The amount of adjustments are taken when the adjustment plate is in the center position are: 5/8" up, 3/4" down, 1/4" side right and left, and diagonal adjustments 1" heal and 1-3/8" toe. Limited 5-year warranty.

  P65 Warning WARNING
This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to


QuantityPrice / ea

Comp Coil Unit Weight:    Just under 1 lb. (does not include pad) 


  • Comp Coil Unit
  • Recoil Pad Adjustment Kit
  • Two Extra Foam Bushings
  • Mounting Screws for Comp Coil
  • Mounting Screws for Adjuster Kit
  • Adjustment Wrench for Comp Coil
  • Adjustment Wrench for Adjuster Kit
  • Owner's Manual

A screw on pad will need to be purchased separately.

50013 Set Screw
50020 Allen Wrench (back casting)
50022 Foam Bushing
50032 Drill Fixture
50033 Drill Bushing
50034 1-1/16" Drill with 1/2" Shank
50052 1/2" KICK-EEZ Recoil Pad
50052-1 1-1/8" KICK-EEZ Recoil Pad
50052-2 3/4" KICK-EEZ Recoil Pad - Trap Pad
50035 9/16" Drill with 1/2" Shank
50036 1/8" Drill
50037 1-1/4" Wood Screws (set of two)
50019 1" #10 Wood Screws (set of two)