Auger Bucket

Transport Mix Dispense

Concrete (up to 1” slump), Wildlife Feed, and Agricultural Grains
How to Buy
Watch Video
1"
Slump
1/2 yard
Capacity
6 1/2"
Diameter Auger

Transport, mix, and dispense concrete (up to 1” slump), wildlife feed, and agricultural grains.

The Auger Bucket has a ½ yard capacity (13.5 cubic feet) an optional hopper extension can be added to increase the capacity to ¾ yard (20.25 cubic feet). Rubber-flighted design acts as a seal to limit materials leaking out of the bucket. Skid-steer quick attach mount on both sides for left or right discharge. All buckets come standard with one 2’ and one 3’ chute and a 7’ hose kit with flat faced couplers and motor fittings.

FEATURESVersatile

1/2 yard Capacity

The Auger Bucket has a ½ yard capacity (13.5 cubic feet) an optional hopper extension can be added to increase the capacity to ¾ yard (20.25 cubic feet).

Reach

Reach difficult areas for footings, slabs, sidewalks, fence posts, sign posts, deck posts, piers, etc.
 

Rubber-Flighted

Rubber-flighted design acts as a seal to limit materials leaking out of the bucket.

Skid-Steer

Quick attach mount on both sides for left or right discharge.

Standards

All buckets come standard with one 2’ and one 3’ chute and a 7’ hose kit with flat faced couplers and motor fittings.

Auger Bucket

Options and Specifications

Auger Bucket Application
Heavy Service Motor
How to Buy
Part ID: 11000 - Auger Bucket Model 3110 - Discharge Auger - Rubber-Flighted (4 Bolts)
  • Capacity

    1/2 yd (13.5 cubic ft); up to 3/4 yard (20.25 cubic ft) with optional hopper extension.

  • Hydraulic Requirements

    12 GPM
    2,000 PSI

  • Mounting Options

    Skid-Steer

  • Overall Height (A) (inches)

    27"

  • Overall Width (B) (inches)

    21-1/2"

  • Overall Length (C) (inches)

    74-1/2"

  • Overall Bucket Length (D) (inches)

    68-1/2"

  • Weight

    380 lb.

  • Auger Length (inches)

    61-1/2"

  • Auger Diameter without Rubber (inches)

    4"

  • Auger Diameter with Rubber (inches)

    6-1/2"

  • Auger Flighting Spacing (inches)

    4"

NOTE:  Rubber-flighted auger models for wet materials. PN 11063 steel auger models must be used for dry materials, sand and asphalt.

Part ID: 11001 - Auger Bucket Model 3120 - Mixing Auger - Rubber-Flighted (7 Bolts)
  • Capacity

    1/2 yd (13.5 cubic ft.); up to 3/4 yard (20.25 cubic ft.) with optional hopper extension.

  • Hydraulic Requirements

    12 GPM
    2,000 PSI

  • Mounting Options

    Skid-Steer

  • Overall Height (A) (inches)

    27"

  • Overall Width (B) (inches)

    21-1/2"

  • Overall Length (C) (inches)

    74-1/2"

  • Overall Bucket Length (D) (inches)

    68-1/2"

  • Weight

    380 lb.

  • Auger Length (inches)

    61-1/2"

  • Auger Diameter without Rubber (inches)

    4"

  • Auger Diameter with Rubber (inches)

    6-1/2"

  • Auger Flighting Spacing (inches)

    4"

NOTE:  Rubber-flighted auger models for wet materials. PN 11063 steel auger models must be used for dry materials, sand and asphalt.

Part ID: 11002 - Auger Bucket Model 3110 -Discharge Auger with Heavy Service Motor -- Rubber-Flighted (4 Bolts)
  • Capacity

    1/2 yd (13.5 cubic ft); up to 3/4 yard (20.25 cubic ft) with optional hopper extension.

  • Hydraulic Requirements

    12 GPM
    2,000 PSI

  • Mounting Options

    Skid-Steer

  • Overall Height (A) (inches)

    27"

  • Overall Width (B) (inches)

    21-1/2"

  • Overall Length (C) (inches)

    74-1/2"

  • Overall Bucket Length (D) (inches)

    68-1/2"

  • Weight

    380 lb.

  • Auger Length (inches)

    61-1/2"

  • Auger Diameter without Rubber (inches)

    4"

  • Auger Diameter with Rubber (inches)

    6-1/2"

  • Auger Flighting Spacing (inches)

    4"

NOTE:  Rubber-flighted auger models for wet materials. PN 11063 steel auger models must be used for dry materials, sand and asphalt.

Part ID: 11003 - Auger Bucket Model 3220 - Mixing Auger with Heavy Service Motor -- Rubber Flighted (7 bolts)
  • Capacity

    1/2 yd (13.5 cubic ft.); up to 3/4 yard (20.25 cubic ft.) with optional hopper extension.

  • Hydraulic Requirements

    12 GPM
    2,000 PSI

  • Mounting Options

    Skid-Steer

  • Overall Height (A) (inches)

    27"

  • Overall Width (B) (inches)

    21-1/2"

  • Overall Length (C) (inches)

    74-1/2"

  • Overall Bucket Length (D) (inches)

    68-1/2"

  • Weight

    380 lb.

  • Auger Length (inches)

    61-1/2"

  • Auger Diameter without Rubber (inches)

    4"

  • Auger Diameter with Rubber (inches)

    6-1/2"

  • Auger Flighting Spacing (inches)

    4"

NOTE:  Rubber-flighted auger models for wet materials. PN 11063 steel auger models must be used for dry materials, sand and asphalt.

Part ID: 11004 - Auger Bucket Model 3131 - Sandbagging Auger Steel Auger w/Scraper Blade Installed
  • Capacity

    1/2 yd (13.5 cubic ft.); up to 3/4 yard (20.25 cubic ft.) with optional hopper extension.

  • Hydraulic Requirements

    12 GPM
    2,000 PSI

  • Mounting Options

    Skid-Steer

  • Overall Height (A) (inches)

    27"

  • Overall Width (B) (inches)

    21-1/2"

  • Overall Length (C) (inches)

    74-1/2"

  • Overall Bucket Length (D) (inches)

    68-1/2"

  • Weight

    380 lb.

  • Auger Length (inches)

    61-1/2"

  • Auger Diameter without Rubber (inches)

    4"

  • Auger Diameter with Rubber (inches)

    6-1/2"

  • Auger Flighting Spacing (inches)

    4"

NOTE:  Rubber-flighted auger models for wet materials. PN 11063 steel auger models must be used for dry materials, sand and asphalt.

Part ID: 11005 - Auger Bucket Model 3230 - Asphalt Auger Steel Auger
  • Capacity

    1/2 yd (13.5 cubic ft.); up to 3/4 yard (20.25 cubic ft.) with optional hopper extension.

  • Hydraulic Requirements

    12 GPM
    2,000 PSI

  • Mounting Options

    Skid-Steer

  • Overall Height (A) (inches)

    27"

  • Overall Width (B) (inches)

    21-1/2"

  • Overall Length (C) (inches)

    74-1/2"

  • Overall Bucket Length (D) (inches)

    68-1/2"

  • Weight

    380 lb.

  • Auger Length (inches)

    61-1/2"

  • Auger Diameter without Rubber (inches)

    4"

  • Auger Diameter with Rubber (inches)

    6-1/2"

  • Auger Flighting Spacing (inches)

    4"

NOTE:  Rubber-flighted auger models for wet materials. PN 11063 steel auger models must be used for dry materials, sand and asphalt.

Auger Buckets Gallery

Literature and Media

Brochures

Brochures

Operator's Manual

Operator's Manual

Warranty Policy

Warranty Policy

Name
Danuser Auger Bucket Feeding Cows
Company Vertical

Warning

This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.