Counter Coil

It is not a weight system

Unlike other recoil reducers, the Counter Coil is a true adjustable hydraulic shock absorbing unit. The hydraulic cylinder compresses, absorbing the shock of recoil and decelerates the rearward thrust of the firearm. What this means to the shooter is less recoil is felt. The cylinder is single acting, which means the shooter can adjust the compression stroke for a 12 gauge shotgun or a .458 Winchester magnum, and their return rate is unaffected. With the wrench provided, the adjustments can be made in the field in less than 10 seconds. Adjustments are made by turning the cylinder rod with your fingers. There are 3-5 revolutions of adjustments available. When the unit is adjusted to the most comfortable setting, further adjustments are not necessary.

Make Shooting & Hunting
more Enjoyable

LESS
	Recoil

No more aching shoulders and back
Increases accuracy by reducing flinching
Provides hours of enjoyable practice without unnecessary fatigue
Allows full concentration on target...not on recoil!

top of page

Frequently Asked Questions (FAQs)

Q. Does the Counter Coil change the pull length of the gun?
A. The recoil unit without a pad is approximately 1-3/16" in length. Since the stock must be cut for installation, this is an ideal time to make adjustments to the pull length.

Q. What will Counter Coil do for face felt recoil?
A. This type of recoil may be reduced by cutting down pitch into the stock during installation. This puts the guide pins on an angle, causing the comb of the stock to come back and down away from the face during compression.

Q. Can I install the unit myself?
A. Yes. We offer a metal drill guide as an optional purchase. However, we recommend a competent gunsmith do the installation, or, we offer factory installation.

Q. Does the Counter Coil require much maintenance or service?
A. Under normal conditions, no. However, if the gun is used in rain, the guide pins should be dried and regreased, which takes less than a minute.

Q. Can a Counter Coil be installed on all guns?
A. The Counter Coil can be installed on most long guns. Automatics that have action return spring in the stock would need to be modified. However, we do not recommend this practice. The unit can be easily installed on fiberglass rifle stocks.

Q. How will the Counter Coil operate in extreme cold conditions?
A. In sub-zero temperature, the unit will become slightly stiffer but will still operate normally.

Q. Will installing a Counter Coil change my point of impact?
A. No, except on high powered rifles where muzzle rise is a factor. Customers and gun writers have reported point of impact dropping on some heavy calibers.

top of page

Limited (Two-Year) Warranty

Danuser Machine Company, Inc., warrants its product, Counter Coil, to the original consumer purchaser, to be free from defects in material and workmanship for a period of two years after the date of original purchase.

All products returned under warranty must be returned prepaid to our factory.
This warranty does not cover incidental expenses incurred by you, including, but not limited to, shipping cost and insurance.
Products or parts thereof which have been, by Danuser Machine Company's examination, improperly operated, damaged by accident or negligence, field repaired or altered, are not covered by this warranty.
Our obligation under this warranty is limited to repair or replacement at our factory of any part or parts thereof which Danuser Machine Company, Inc., determines to be defective.
Any return for warranty consideration must be accompanied by description of problem and proof of purchase.
We reserve the right to change our specifications and design at any time.

How to Buy

Literature Request

top of page