- Made in the USA
- Family-owned, 4 generations
-
"Good enough won't do - it must be right!" K.B. Danuser, Founder
|
|
|
|
|
Update your older Danuser PTO Digger to current production safety standards and provide parts availability in the future. F-Series
CURRENT
F-SERIES DIGGER ! DO NOT OPERATE YOUR OLDER F-SERIES PTO DIGGER UNTIL YOU HAVE UPDATED TO CURRENT PRODUCTION SAFETY STANDARDS. Current production Danuser F-Series PTO Diggers include a # 7562 Pinion Assembly. They have a black plastic Pinion Guard and black plastic guards on the driveline, and the driveline will be connected to the input pinion using a roll pin.
If
the serial number of your F-Series PTO Digger is 60,001 to 71,199 and the
unit has not been converted to the # 7562 Pinion Assembly, you need
to purchase a # 7578
Conversion Kit. The # 7578 Conversion Kit includes a pinion with hardware,
Pinion Guard, gaskets, grease seals, all driveline parts out through the
center cross at the U-Joint on the gearbox, and the # 7270 Auger Adapter
Guard for 2-3/8" diameter center column augers.
This # 7578 kit is required on all diggers with serial numbers
ranging from 60,001 to 71,199. The
# 7580 Conversion Kit is the same as the # 7577 Conversion Kit, except it
comes with a # 9545 Auger Adapter Guard for 3-5/8" diameter center
column augers. The
# 7581 Conversion Kit is the same as the # 7578 Conversion Kit, except it
comes with a # 9545 Auger Adapter Guard for 3-5/8" diameter center
column augers.
To
install these conversion kits, you will need to disassemble the gearbox.
Instructions sheets are provided in the kits.
Your dealer may offer installation for a fee.
After the conversion has been made and the gearbox is assembled,
you will need to add 3 lbs. Shell Alvania EP2 Grease (old name-Texaco MultiFax-EP2) or
equivalent. DO NOT ADD OIL
TO THE F-SERIES GEARBOX. If you have any questions, concerns, or would like to place an order, contact Danuser Machine Company, Inc. at (573) 642-2246 or e-mail sales@danuser.com. Current
production Danuser G20/40 PTO Diggers include a # 6136 Auger Adapter
Guard. If the serial number
of your G20/40 is prior to 11,152, you need to purchase a # 6136 Auger
Adapter Guard. This guard is required on all G20/40 PTO Diggers.
See photograph below.
DO NOT
OPERATE THE G20/40 PTO
DIGGER UNTIL THE This
Guard Kit is sold direct at NET PRICE plus shipping: If you have any questions, concerns, or would like to place an order, contact Danuser Machine Company, Inc. at (573) 642-2246 or e-mail sales@danuser.com.
|
