• Made in the USA
• Family-owned, 4 generations

• "Good enough won't do - it must be right!"  K.B. Danuser, Founder

BALL JOINTS

Danuser Ball Joints are manufactured for use in a variety of applications.  From connecting ends for adjustment links and pitch control links, to cylinder heads and rod ends, Danuser Ball Joints are the answer where a flexible connection is required.  This multi-directional movement of the spherical ball prevents binding on clevis ends and other non-spherical connections.

The retainers are machined from cold finish seamless tubing for superior strength.  Retainers are also available with provisions for grease fittings and grease grooves.

The balls are machined smooth and case hardened to minimum Rockwell C-62 for superior wear.  Plain finish on the ball is standard.  Hard chrome or zinc plating is available. 

Danuser welcomes your inquiries on ball joint assemblies made to your design and specifications.

	PART NO.	DIMENSIONS IN INCHES
		A PIN SIZE	B	C	D
	5982	.50	2.00	1.00	3/8
	5870	.62	2.00	1.00	3/8
	5974	.62	2.25	1.00	3/8
	5868	.75	2.00	1.00	3/8
	5973	.75	2.25	1.00	3/8
	5347	.75	2.25	1.38	9/16
	5860	.75	2.50	1.38	3/8
	5088	.87	2.25	1.38	9/16
	5827	.87	2.50	1.38	3/8
	7466	1.00	2.00	1.00	3/8
	5975	1.00	2.25	1.00	3/8
	5526	1.00	2.75	1.75	7/8
	5849	1.00	3.12	1.75	9/16
	5832	1.12	2.75	1.38	11/16
	5495	1.12	2.75	1.75	13/16
	5859	1.12	3.12	1.38	3/8
	5836	1.12	3.12	1.75	9/16
	5924	1.25	2.75	1.75	7/8
	5925	1.25	3.12	1.75	9/16
	5865	1.43	3.50	1.75	1/2
	5976	1.43	3.50	1.75	1/2
	5918	1.43	4.00	1.75	5/8
	5987	1.50	4.50	2.50	1
	5910	1.75	4.50	2.50	1
	5912	2.00	4.50	2.25	1
	SHOULDERED BALL
	5500	.75	2.00	1.75	3/8
	5988	.75	2.25	1.75	3/8
	5985	1.25	3.50	2.00	1/2
	5984	1.25	4.00	2.00	5/8