EP1020 Auger System

PART ID: 180406
The NEW EP Auger System is ideal for various industries and applications. A robust, planetary manufactured to our engineering design, and a motor rated up to 3500 PSI means greater torque than previous EP models. The planetary also features easily accessible check and fill plugs which means quick and easy maintenance. The output spindle is manufactured as a single piece, allowing us to offer a lifetime warranty covering output spindle pullout. The NEW EP Auger Drive comes with a five-year warranty.
 

FEATURES:

  • The New EP is built with a Danuser planetary, manufactured to our engineering design, creating a planetary with up to 50% more output torque strength than the competition.
  • Compatible with 2” hex auger bits.  
  • Hoses routed out the top of the drive unit, secured with bulkhead nuts, allow for deeper digging in tighter spots with better hose protection. All drive units ship with 45° fittings installed.
  • Mounts available for skid-steer, front-end loader, backhoe, and excavator.
  • A single skid-steer quick attach mount fits both skid-steers and front-end loaders. Hose holder spring kit included on skid-steer mount and offset tractor loader mounts.
  • All quick attach mounts offer an adjustable cradle with two positions for transporting at 15° or 30° angles.
  • Comes with 5-Year warranty on drive unit and lifetime warranty covering output spindle pullout.
 
Warranty
5-years
Lifetime on output spindle pull out!

How to Buy

  P65 Warning WARNING
This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product.
Max. Dia. Auger:30"
Requirements:10 - 20 GPM up to 3500 PSI
Max. Hyd. Back Pressure:1500 PSI
Gearbox Ratio:3.86:1

 

EP1020

Output Speed Output Torque
GPM RPM PSI FT.-LBS.
10 48 2500 1587
3000 1904
3500 2222
12 58 2500 1587
3000 1904
3500 2222
14 68 2500 1587
3000 1904
3500 2222
15 72 2500 1587
3000 1904
3500 2222
18 87 2500 1587
3000 1904
3500 2222
20 97 2500 1587
3000 1904
3500 2222
 
Yellow-shaded areas indicate recommended operating ranges.
 
Output speed and torque specifications are based on theoretical values and are provided for comparative purposes only.
PART ID DESCRIPTION
180415 Skid-Steer Quick Attach - Center & Offset
180415CSE Skid-Steer Quick Attach - Center & Offset (Fits Case Models 1835B, 1835C, & 1840)
190052 Front-End Loader Quick Attach - Offset (Euro/Global)
190053 Front-End Loader Quick Attach - Offset (John Deere 200-500)
180469 Backhoe & Excavator Quick Attach Mounting Kit (CAT 420D & 420E (pin grabber))
180477 Backhoe & Excavator Quick Attach Mounting Kit (CAT 2008-2013 302D, 302.4D, 302.5, 302.5C, 302.7D)
180484 Backhoe & Excavator Quick Attach Mounting Kit (CAT 305.5E/304C CR)
180508 Backhoe & Excavator Quick Attach Mounting Kit (JD 26G/27D/30G/35D/35G (wedge))
180512 Backhoe & Excavator Quick Attach Mounting Kit (JD 50D/50G/60G (wedge))
180548 Backhoe & Excavator Quick Attach Mounting Kit (Kubota KX057 USA models only)
180565 Backhoe & Excavator Quick Attach Mounting Kit (Bobcat X-Change)
190156 Backhoe & Excavator Quick Attach Mounting Kit (Kubota KX080 USA models only)
190160 Backhoe & Excavator Quick Attach Mounting Kit (JD 17D/17G)
180521 Backhoe & Excavator Quick Attach Mounting Kit (Yanmar VIO40/45/50/55 (quick coupler))
180533 Backhoe & Excavator Quick Attach Mounting Kit (Yanmar VIO27/35 (quick coupler))
180539 Backhoe & Excavator Quick Attach Mounting Kit (Kubota KX161-3 & U45 USA models only)
180544 Backhoe & Excavator Quick Attach Mounting Kit (Kubota C39/45, KX71-3, KX040, KX91-3, KX121-3, & U35 USA models only)
180552 Backhoe & Excavator Quick Attach Mounting Kit (Kubota U25 & U27 USA models only)
180556 Backhoe & Excavator Quick Attach Mounting Kit (Kubota KX141-3 USA models only)
180560 Backhoe & Excavator Quick Attach Mounting Kit (TAG Pin Grabber Style (quick coupler))
180572 Backhoe & Excavator Quick Attach Mounting Kit (TAG QC27 Style (quick coupler))
192008 Backhoe & Excavator Quick Attach Mounting Kit (TAG QC30 Style (quick coupler))
180435 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 1" (25mm)
180436 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 30mm
180437 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 1-1/4"
180438 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 1-3/8" (35mm)
180439 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 1-1/2"
180440 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 40mm
180441 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 1-5/8"
180442 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 1-3/4"
180443 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 45mm
180444 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 50mm
180445 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 2"
180446 Backhoe & Excavator Pin-On Mounting Kit - Bucket Pin Dia. 55mm
192015 Universal Mounting Kit
190203 Bolt-On Bucket Kit
190034 JD 310/410, Fits all series except G
3501 Backhoe & Excavator Mount Specification Form
190166 Backhoe & Excavator Quick Attach Mounting Kit (CAT 308, 309)

Fab

Bolt-on tooth design for light to moderate ground conditions.

Features:
Available in 36”, 48” (standard), 60”, and 72” lengths. Hardened teeth and fishtail pilots. Teeth and pilots available with dirt, hardfaced, and carbide options. Flighting is 3/8” thick. Fits PRO and EP auger drives.
(click to see available auger bits)
DiameterWeightTeethModel
442n/a10600
646210603
878210606
985310609
1098310612
12115410615
15135510618
16146510621
18170610624
20182610627
24211810630
30272910633
DiameterWeightTeethModel
442n/a10600-3
642210603-3
857210606-3
962310609-3
1069310612-3
1278410615-3
1587510618-3
1693510621-3
18106610624-3
20134610627-3
24153810630-3
30208910633-3
DiameterWeightTeethModel
451n/a10600-5
651210603-5
8101210606-5
9111310609-5
10126310612-5
12145410615-5
15164510618-5
16177510621-5
18207610624-5
20254610627-5
24268810630-5
30445910633-5
DiameterWeightTeethModel
460n/a10600-6
660210603-6
8128210606-6
9141310609-6
10160310612-6
12186410615-6
15193510618-6
16208510621-6
18244610624-6
20296610627-6
24325810630-6
30527910633-6

Tree

Bolt-on tooth design for tree and shrub planting.

Features:
Available in 48” length. Hardened teeth and fishtail pilots. Teeth and pilots available in dirt, hardfaced, and carbide options. Flighting is 3/8” thick. Stepped auger design. Fits PRO and EP auger drives.
(click to see available auger bits)
Choose Length Below
DiameterWeightTeethModel
18129710639
241861010642
302301110645

Cast

Drive in teeth for difficult ground – Fracturable rock, asphalt, frozen ground, heavy clay, and compacted soils.

Features:
Available in 36”, 48” (standard), 60”, and 72” lengths. Hardened teeth and fishtail pilots. Teeth and pilots available in dirt, hardfaced, and carbide options. Flighting is 3/8” thick. Fits PRO and EP auger drives.
(click to see available auger bits)
DiameterWeightTeethModel
640210657-3
867410660-3
970410663-3
1074410666-3
1281410669-3
1590610672-3
1696610675-3
18108610678-3
20122610681-3
24154810684-3
302091010687-3
DiameterWeightTeethModel
648.1210657
883410660
989.4410663
10102410666
12117410669
15139610672
16148610675
18168610678
20231610681
24210810684
302801010687
DiameterWeightTeethModel
662210657-5
8121410660-5
9125410663-5
10143410666-5
12158410669-5
15167610672-5
16180610675-5
18209610678-5
20241610681-5
24269810684-5
303741010687-5
DiameterWeightTeethModel
670210657-6
8138410660-6
9140410663-6
10146410666-6
12189410669-6
15196610672-6
16212610675-6
18246610678-6
20284610681-6
24327810684-6
305291010687-6

Rock

Carbide bullet style teeth for solid rock, concrete, fracturable rock, asphalt, frozen ground, and compacted soils.

Features:
Available in 48” length. Starter flight is 3/4” and the balance of the flighting is 3/8”. Fits PRO and EP auger drives.
(click to see available auger bits)
Choose Length Below
DiameterWeightTeethModel
4.5704200152
6666200155
8948200158
91028200161
1010510200164
1213412200167
1517115200170
1820818200173
2429122200176
3034024200179

Wobble

Pushes through dirt, sand, clay, asphalt, compacted, and embedded rock. Danuser’s dirtless digging solution!

Features:
Available in 48” length. Spiral and checkered hardfacing. Pilots available in dirt, hardfaced, and carbide options.
(click to see available auger bits)
Choose Length Below
DiameterWeightTeethModel
458n/a20600
686n/a20603

2" Rock Drill

For pilot holes or setting posts up to 2" O.D. in solid rock.

Features:
Available in 36" length. Fits PRO and EP auger drives.
(click to see available auger bits)
Choose Length Below
DiameterWeightTeethModel
230n/a10739
PART ID DESCRIPTION
190172 1/2" Hose Holder Spring Kit
196025 1/2" Hose Kit, 108" with Abrasion Sleeves
196027 1/2" Hose Kit, 108" with Couplers & Abrasion Sleeves
196035 Cross Port Relief Valve
196056 Front-End Loader Hose Kit
10048 Male Hydraulic Coupler
10049 Female Hydraulic Coupler
206031 1/2" Backhoe & Excavator Hose Kit, 54” long with Abrasion Sleeves
206032 1/2" Backhoe & Excavator Hose Kit, 54” long with Couplers & Abrasion Sleeves
10900 24" Long Variable Extension - 2" Hex
10901 48" Long Variable Extension - 2" Hex
10902 72" Long Variable Extension - 2" Hex
10910 12" Long Fixed Extension - 2" Hex
10911 24" Long Fixed Extension - 2" Hex
10912 48" Long Fixed Extension - 2" Hex
10913 72" Long Fixed Extension - 2" Hex
10921 Adapter - 2" Hex to 2-9/16" Round
10922 Adapter - 2" Hex to 2" Round
20211 Adapter - 2" Hex to 2-9/16" Round - Allows attachment of augers with 1/2" diameter bolt.
20214 Adapter - 2" Hex to 2" Round - Allows attachment of augers with 1/2" diameter bolt.